USED FENDER CUSTOM SHOP / 1960 Precision Bass Journeyman Relic CAR MOD 2019 [10]

Item rank: B+: Some scratches, but no problem in normal use
Serial number: R95589
Year of manufacture: 2019
Country of manufacture: USA
Case: Genuine hard case included
Accessories: Custom Shop Certificate, Spec Sheet, Hard Case Key
Weight: 3.99kg
Truss Rod: No problem when checked up to 60 degrees to the left and right of the rod with a note (not much left)
Fretboard: No problem, sufficient fretboard height.
String Height (bass string side): 2.5mm above the 12th fret
String height (treble string side): 2.0mm above the 12th fret
Nut width: 44.76mm
Neck thickness (near 1st fret): 20.43mm
Neck thickness (near 12th fret): 25.33mm
SCALE：864mm (34")
RADIUS：184mm (7.25")
Setup strings: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin replacement
Other: M.O.D. replacement: Bridge: "GOTOH" 303BO-4 Chrome, Strap button: "GOTOH" EP-B2 Chrome, Processing: Fingerboard side position mark: replaced with a dot mark of 4mm diameter, Fingerboard end slope processing Two mystery holes on the pickguard near the FB end, a hole for a creative finger rest near the bridge on the 4th string side of the body, and a Journeyman's Relic finish, which is more than a closet classic but less than a classic, which may be classy.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipment, we will inform you separately.

specs

Item Rank
B+: Some scratches, but no problem in normal use

Serial No.
R95589

Year of manufacture
2019

Country of Manufacture
United States of America

Case.
Genuine attached hard case

Accessories.
Custom Shop Certificate, Spec Sheet, Hard Case Key

Weight
3.99kg

Truss Rod
No problem (not much left), rod has been checked up to 60 degrees left and right.

Remaining frets
No problem, there is enough fret height

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut width
44.76mm

Neck Thickness (near 1st fret)
20.43mm

Neck Thickness (near 12th fret)
25.33mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Setup Strings
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin replacement

Other repairs
M.O.D. replaced: bridge: "GOTOH" 303BO-4 Chrome, strap buttons: "GOTOH" EP-B2 Chrome, fingerboard side position marks: replaced with 4mm diameter dot marks, fingerboard end sloped, FB Two mystery holes on the pickguard near the FB end, a hole for a creative finger rest near the bridge on the 4th string side of the body, and a Journeyman's Relic finish, which is more than a "closet classic" but less than a "classic", which may be considered elegant.