USED FENDER USA / American Standard Telecaster [10]

Item rank: B+: Some scratches, but no problem in normal use
Serial number: US11201439
Year of manufacture: 2011
Country of manufacture: USA
Case: Hard case
Accessories: -
Weight: 3.67kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, enough fret height.
String Height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 42.8mm
Neck thickness (near 1st fret): 21.1mm
Neck thickness (near 12th fret): 22.1mm
Scale: 648mm (25.5")
RADIUS：241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: Jack replaced, rear PU rubber spring replaced
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
Others: The sound of the first string is a little blurred due to the saddle, but it is not a problem now. The jack plate could not be fixed due to the unrepairable wood, so it has been glued with epoxy.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipping, we will inform you separately.

Specs

Item rank B+: Some scratches, but no problem in normal use.

Serial number US11201439

Year of manufacture 2011

Country of manufactureUSA

CaseHard case

Accessories

Weight 3.67kg

No truss rod problems, rod checked up to 60 degrees to the left and right

No fret remainder problem, enough fret height

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.8mm

Neck thickness(near 1st fret)21.1mm

Neck thickness (near 12th fret)22.1mm

Scale648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Modified partRear PU rubber spring replacement, Jack replacement

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

OthersThe sound of the first string is a little blurred due to the combination with the saddle, but there is no problem now. The jack plate could not be fixed because the wood was not repairable, so it was glued with epoxy.