USED Fender USA / 1965 Jaguar Sunburst MOD [10]

A 1965 Fender Jaguar with upgrades has arrived!

A vintage Fender Jaguar has arrived.
Based on the serial number, pot dates (a mix of 1964 and 1965), the sunburst finish, and the characteristics of the fingerboard, we believe this guitar was built in 1965.
Underneath the neck plate and preset control plate, traces of the three-color sunburst’s red layer remain, showing a subtle fade.
As for the overall condition of the body, this instrument is now in its 61st year.
While there are signs of various age-related wear and deterioration of the plating on the metal parts, there is no critical damage, so it is in good enough condition to play right away.
Furthermore, there are no signs of irregularity or tampering in the solder work on the control circuitry; therefore, it appears to be fully original and “solder-virgin,” including the pickups (black bobbins), pots, capacitors, resistors, and wiring.
As for parts other than the mods, the configuration is based on historical accuracy: the tuning pegs (Kluson Deluxe Double Line), string guides, the neck seam in the neck pocket (thick black Vulcan fiber), the pickguard, and the square aluminum shield plate attached to the pickguard with adhesive tape (featuring a KASER print), as well as the floating tremolo and strap buttons—many of these appear to be original parts.

Control components: Preset volume / 1 MEG LIN 6506, Preset tone / 50K LIN 6438, Preset capacitor / .01K,Bright Switch Capacitor / 0.003, Volume Pot / 1MEG AUD 6509, Tone Pot / 1MEG AUD 6508, Tone Capacitor / 0.01K, Tone Resistor / 56K (all capacitors are Circle D)

MOD (Upgrade/Modification) Details
(1) Fret & Nut Replacement: Narrow-tall type, medium jumbo size frets (possibly JD6105 or Jescarr #55090, etc.)
(2) Bridge Unit: GOTOH (Goto Gut) GE103B-T type
All work has been completed to professional repair standards. Additionally, the fret and nut replacement appears to have been performed relatively recently.
It appears that after the upgrade modifications were completed, the instrument was not subjected to intensive performance use or heavy wear and tear.

Condition Grade: B: Shows significant scratches and signs of use, but is in good working condition for normal use

Serial Number: L69722
Year of Manufacture: 1965
Country of Manufacture: USA
Case: Gig Case
Accessories: Tremolo arm (similar to genuine stainless steel JG/JM models), original mute (mute foam and spring missing), original bridge anchor (bridge channel and saddles missing), original frets and nut
Weight: 3.89 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Low String Side): 12th fret, 2.0 mm
Nut width: 41.2 mm
Neck thickness near the 1st fret: 24.6 mm
Neck thickness near the 12th fret: 29.3 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.