USED GRECO / GZ-3500MF/24 Natural 2005 [10]

Top-grade Greco Semaitis-era model with a metal front, made in Japan in 2005, now in stock!

The body is a one-piece mahogany, and the neck is also mahogany. A lavishly engraved duralumin metal front is affixed to the body top. The neck profile is thin overall, and the fingerboard is ebony. The scale length is 635mm.
It is equipped with original DiMarzio DP103 PAF pickups. It features original conductive paint, and the pots are high-quality CTS 300k units, with original Orange Drop capacitors. The tuners are Schaller M6, and the headstock, truss rod cover, and jack plate all feature engraving, giving it a distinct Zemaitis feel.

The body finish was satin when new, but has developed a sheen, particularly along the edges, due to use. The top of the body has general wipe marks and polishing marks. There are general scuff marks and dents across the body, concentrated in the lower-left area of the top, and there is paint peeling at the tip of the cutaway. There is a pea-sized area of paint peeling on the lower-left edge of the back, and dents and scuff marks are scattered along the outer edges, primarily in the lower section.Additionally, the body back has scratches and dents of various sizes. The back of the neck has a general sheen from use, and there is a pea-sized dent near the 6th string at the 9th fret. There is a small dent at the top-right corner of the headstock, and the headstock top has linear scratches and uneven satin finish due to aging. There is minor plating wear from picking, primarily around the pickup escutcheon. The bridge string height adjustment mechanism shows some wear but functions properly.

The neck is in good condition, and the truss rod can be adjusted both ways. There are no noticeable string marks on the frets, and they have about 70% of their original material remaining. The current string height is set to approximately 2.0 mm on the 6th string side at the 12th fret and approximately 1.5 mm on the 1st string side.

Overall, the guitar has been played extensively and shows signs of wear appropriate for its age, but there are no unsightly scratches. This is a top-grade model from that era featuring an ebony fingerboard, neck binding, and a metal front. The Danny O'Brien-designed plate is exquisite and looks great! With a mahogany body, duralumin bridge, and 24-fret configuration, it produces a unique sound! This is a great choice for slide players as well!

Neck condition: No issues
The truss rod can be adjusted both to tighten and loosen.
Approximately 70% of the frets remain
Made in Japan
Case: Original hard case
Accessories: None
Weight: 3.50 kg
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 0506025

Condition: B+: Some scratches, but no issues for normal use

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.