USED YAMAHA / Pacifica PAC612VIIFMX Fired Red [11]

The body is slightly smaller in size while following a traditional style, and the superb design is distinctive.
The pickguard with a reduced surface area gives it a stylish look without being obnoxious.
The front pickup is a Seymour Duncan SSL-1, the center is a Seymour Duncan SSL-1 RwRp, and the rear is a Seymour Duncan covered humbucking Custom5. 3 pickups allow the guitar to be used in various musical genres. The bridge is a Wilkinson VS-50. The bridge is equipped with a Wilkinson VS-50 bridge for smooth arming and Grover Locking tuners.

There are large scuff marks on the back of the body, and the paint coating has peeled off, making it slippery.
There is also some paint peeling in the same area that can be seen down to the wood.
There are sticker marks on the back panel.
There are no noticeable scratches on the top of the body.
The neck is slightly twisted, but there is no problem in playing condition.

Item Rank|B+: Some scratches, but no problem in normal use.

Serial number|IIP233363
Year of manufacture|-
Country of manufacture
Case|genuine soft case
Accessories|Arm
Weight|3.43kg
Truss Rod|No problem, rod is set at 60 degrees to the left and right.
Fretboard: No problem, enough fretboard height
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.8mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|23.5mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, sticker removal
Other|-

specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial number
IIP233363

Year of manufacture
-IIP233363

Country of manufacture
-Country of Manufacture

Case
Genuine soft case

Accessories
Arm

Weight
3.43kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
40.8mm

Neck Thickness (near 1st fret)
21.1mm

Neck Thickness (near 12th fret)
23.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modification
-Repair/Maintenance

Repair and Maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, sticker removal

Other
-Other