USED Jackson USA / Phil Collen PC1 Trans Amber [11]

The Def Leppard lead guitarist "Phil Collin" signature model is in stock.
It consists of a quilted maple top, caramel mahogany back, bolt-on 2-piece quilted maple neck with graphite reinforcement on the caramelized finish, and caramel maple fingerboard.
Front pickup is a PC1 Sustainer Driver, center is a DiMarzio HS-2 DP116, and rear is a DiMarzio DP-152-F.
Front sustainer and rear coil tap are available with mini switch and dedicated knob.

Rod nut is slightly tarnished.
There is a seal mark on the back panel. There is a crack on the neck joint.
There is a scratch under the bridge. There is a crack on the side of the body.
There are some scratches and dents.
There is no noticeable abnormality on the neck, and it is in good playing condition.

Item Rank|B+: Some scratches, but no problem in normal use.

Serial number|009003
Year of manufacture
Country of manufacture
Case|genuine hard case
Accessories|Arm
Weight|3.94kg
Truss Rod: No problem, confirmed up to 60 degrees left and right (slightly wavy)
Fretboard: No problem, sufficient fretboard height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|23.1mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and alignment
Other|-

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
009003

Year of manufacture
-Year of manufacture

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Arm

Weight
3.94kg

Truss Rod
No problem (slight waviness)

Fret Remaining
No problem, there is enough fret height

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
21.1mm

Neck Thickness (near 12th fret)
23.1mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modification
-Repair/Maintenance

Repair and Maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and rubbing

Other
-Other