USED Paul Reed Smith / SE CE 24 Black Cherry [11]

This is the first lineup in the SE series since the birth of the CE series in 1988.
This bolt-on neck model uses the same wood material as the Custom24 while being an SE.
Constructed with maple top, mahogany back, maple neck, and rose fingerboard. Equipped with 85/15 "S" pickups that produce a clear sound from low to high frequencies, allowing for a wide range of sound making by coil tapping.

There are some scratches and scuffs, but overall the guitar is in clean condition with little signs of use.
The neck is a little wavy, but there are no problems with normal use.

Serial number: F067018
Year of manufacture: 2024
Country of manufacture: Indonesia
Case: Original soft case
Accessories: Arm
Weight: 3.31kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.7mm
SCALE: 635mm (25")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Serial No.
F067018

Year of manufacture
2024

Country of manufacture
Indonesia

Case
Genuine soft case

Accessories
Arm

Weight
3.31kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
22.7mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment