USED Gibson / 1970s SG Standard Mod Cherry [11]

Vintage Gibson SG Standard from the 1970s is in stock!
The body is a thin 3-piece mahogany body with a beveled contour for ease of playability, a 3-piece mahogany neck with a bolute near the back of the nut for strength and Made In USA engraving on the back of the head, and a rosewood fretboard with a brilliantly even grain.
The neck is made of mahogany with Made In USA engraving on the back of the head, and the fingerboard is made of rosewood.

There is a neck break at the neck joint that has been repaired. It has been touched up by a specialist.
There are screw holes where the large pickguard was changed. The holes have been repaired.
Rear pickup date is 498 181 and is not genuine as it was made in 1981. Front pickup is not dated as it is only stamped numbered and has no date.
Pots are recent CTS. capacitors are ceramic capacitors and are believed to be original.
The pegs have been replaced and the holes have been filled in. Pegs, knobs, bridge, etc. are original parts.
There is a crack on the back panel near the screw hole.
Overall, there are scratches, dents, and rust on the metal.
The neck is slightly twisted, but there are no problems with the playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 966353
Year of production: 1972-75
Country of manufacture: USA
Case: Hard Case
Weight: 3.03kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 26.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
966353

Year of manufacture
1972-75

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.03kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
26.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment