USED Red House / SEEKER J/5 LH MOD Vintage Natural [11]

Red House's top-quality Japanese-made lefty 5-string bass is now in stock.
It is a JB type with a slightly smaller dinky shape, and the material consists of a large wooden ash body, maple neck, and maple fingerboard.
Flame maple on the back of the head is Red House's original head vibration control.

The electrics have been modified and converted from active to passive.
Controls are 1 volume, balancer, 1 tone and dummy switch pot. only Push/Pull is active only on the switch part and rear PU is on/off switch.
Pickups may have been replaced.
Weather checks throughout, partial paint damage, moderate signs of use. There are dents on the head and scratches from the strings.
The neck is nearly straight and in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Country of manufacture: Japan
Case: Original gig case
Weight: 4.10kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 48.4mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.1mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario / .045-.135 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Country of manufacture
Japan

Case
Genuine gig case

Weight
4.10kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
48.4mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
24.1mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario / .045-.135 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing