USED Burny / MG-80X Green [11]

MG-80X, one of the hide models that no longer needs explanation, is now in stock.
It is a rare green-colored one.
The master volume, 3-way selector, and direct switch allow intuitive switching of sounds.

There is a touch-up of paint peeling on the body side. Paint chipping on the body back. Paint cracks on the top of the body. There is a crack on the neck joint.
There are some scratches and dings.
There are no noticeable abnormalities on the neck, and there are no problems with normal use.

Item Rank: B: Fairly scratched and used, but no problems with normal use.

Case: Non-genuine soft case
Weight: 3.09kg
Truss Rod: No problem, rod checked up to 60 degrees left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 21.9mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Case
Non-genuine soft case

Weight
3.09kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
21.9mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment