USED Edwards / E-CY-115D Pearl White [11]

Edwards original model with reverse head.
Alder body with 3-piece maple neck and rosewood fingerboard with 24 frets.
The E-CY series features auto coil split wiring at the lever switch to take full advantage of the HSH pickup layout. This wiring allows the output of the adjustable polepiece side (outer) coil of the humbucker and the center single coil in the mix position. This gives a subtle half-tone sound between the two single coils, which cannot be achieved with the usual mix of humbuckers and single coils.

There are scratches, dents, and rusted parts.
The neck is in good playing condition.
Pickups have been replaced with Duncan SH-4 front, Duncan SSL-2 RWRP center, and TB-14 rear.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: ED0618659
Case: Non-genuine soft case
Weight: 3.31kg
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and it is fine (with high spring).
Fret Remaining: Note: Still can withstand cutting, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 18.2mm
Neck thickness near 12th fret: 19.6mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
ED0618659

Case
Non-genuine soft case

Weight
3.31kg

Truss Rod
No problem (with high spring)

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
18.2mm

Neck thickness near 12th fret
19.6mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair