USED Fender USA / 1975 Stratocaster Sunburst [11]

Fender's 1975 vintage Stratocaster is in stock!
Alder body and maple neck construction. Gray bobbin staccato polepiece pickups.
Large head with truss-rod adjustable brett from the head side.
Three-point neck plate and many other features that are different from Fenders from the 1950s to the mid-1960s.
The gurgling, fat sound characteristic of the 1950s gives it the vintage tone you would expect.

Neck date 9902 1154. center and rear pickups date 91975. pots date 1377517. selector date 51854.9738.
Fingerboard has peeling coating and darkening. There is wood discoloration and coating peeling around the fingerboard edge, sides, and head. There are numerous paint cracks on the body. There are paint chips on the body back.
Overall, there are scratches, dents, and metal rust, and the guitar shows signs of use.
Neck is near straight and in good playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 557883
Year of manufacture: 1975
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.54kg
Truss Rod: No problem (only a little left), with the caveat that the rod has been checked to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 22.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs: D'Addario EXL110 / .010-.046 set

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
557883

Year of manufacture
1975

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Arm

Weight
3.54kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
22.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment