USED Edwards / Artist Series E-K-GA Kaoru Model Black [11]

"Edwards" Dir en grey Kaoru model "E-K-GA" is in stock!
It has an alder body, maple neck, and rosewood/fingerboard.
The famous Ganesha was born at the end of the 90's with a distinctive body shape design.
It is equipped with two humbuckers and a Floyd Ros bridge, the basic specs of the Kaoru model.
This is one of the best value for money that Edwards has to offer.

There are scratches, dings, scuffs, paint chips, and other signs of use throughout.
Both horns are chipped, and there are cuts and dings on the top/end of the body.
The back panel is missing, the head is scratched, and there is an inlay sticker mark on the fingerboard.
The front of the case is torn near the zipper.
There is no noticeable abnormality on the neck, and the playing condition is fine.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: non-genuine soft case
Accessories: Arm and lock pin
Weight: 3.58 kg
Truss Rod: No problem, rod checked up to 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.1mm
SCALE: 648mm (25.5")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Case
Non-genuine soft case

Accessories
Arm and lock pin

Weight
3.58kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
22.1mm

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment