USED Fender USA / 1977 Stratocaster Natural Refinish [11]

Vintage Stratocaster with distinctive 70s specs is in stock!
Large head, top serial, ash body, maple neck, bullet truss rod nut & 3 point stop neck joint, 70s vintage.
Moderately used, this guitar is a good collectible.
Refinished in natural glossy finish.

Center pickup has been replaced. Model unknown.
Front and rear are original with date 61577. pot date, volume 1377636, front tone 1377606, center tone 1377531. capacitor is Circle D. The pickups have been replaced.
Black paint remains on neck pocket and in pickup cavity, original color may be sunburst or black.
Missing back panel.
Overall, there are scratches, dings, and metal rust, showing signs of use.
The neck is slightly twisted. Slightly chattering along with fret wear.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: S774572
Year of manufacture: 1977
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 4.19kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
S774572

Year of manufacture
1977

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
4.19kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
24.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment