USED Fender Japan / TL72-XX Black [11]

One of the Fender Japan TL72's manufactured in the 1980's is in stock.
The most likely candidates are TL72-55 or TL72-50.
The serial number is unknown as the joint plate or bridge may have been replaced. The lack of serial number under the head logo, the Fender Japan logo on the pegs instead of GOTOH, and the smaller and thinner "Made in Japan" printed on the neck make us think that this is an SQ or JV?A serial-era neck.
The body is made of alder or basswood.
The sound is very stable Telecaster sound with Fender Japan's style.
The pickups are believed to be original, but there is no confirmation.
Cool looks, which are rarely seen. This guitar looks more sophisticated than its price.

There is a CTL-50 stamp on the neck pocket.
Pickguard may have been replaced.
There is a crack on the neck joint.
Overall, there are scratches, dents, metal rust, and signs of use.
There are no noticeable abnormalities on the neck and no playing condition problems.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.38kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs & measurements: 1.

Item Rank
B: Fairly scratched and worn, but no problems in normal use.

12 months old

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.38kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.4mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
23.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing