USED Fujigen / JFL-FT-HH Cherry [11]

FUJIGEN J-STANDARD JFL flat top model
Basswood body with mahogany neck and rosewood fingerboard.
The compact body is easy to handle, and the heel-less joint provides high playability.

There are some scratches and dents.
The neck is in good playing condition.
Pickups have been replaced: Rear: Bill Lawrence (model unknown), Front: DiMaggio DP193.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: A160236
Year of manufacture: 2016
Country of manufacture: Japan
Case: Original soft case
Accessories: Wrench
Weight: 3.31kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs, etc.)

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
A160236

Year of manufacture
2016

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Wrench

Weight
3.31kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment