USED B.C.Rich / Shredzilla Extreme Exotic Trans Black Satin [11]

B.C.Rich The Shredzilla, featuring power and technical-oriented features, is now in stock.
It has a through-neck finish, satin finish on the back of the neck, and a Shredzilla deep cut for excellent playability.
It is constructed with a mahogany body, 5-piece maple neck, and ebony fingerboard.
It is equipped with two Fishman humbuckers and one volume/3-way switch/kill switch.

Overall, there are minor scratches, scuffs, and other signs of use, but it is in relatively clean condition.
The back panel is still covered with film.
There is a slight high-hang on the neck, but there are no problems with playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: N08190440
Country of manufacture: Korea
Case: Original gig case
Weight: 3.84kg
Truss Rod: No problem, but I have checked the rod up to 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 20.4mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
N08190440

Country of manufacture
Korea

Case
Genuine gig case

Weight
3.84kg

Truss Rod
No problem (with a little high spring)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
20.4mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing