USED Greco / BOB-65 Black [11]

Greco active bass BOMBARD from the 80's.
This model is famous for being used by the bassist of a certain Japanese girl band.
Alder body, maple 3P neck, rosewood fingerboard.
PJ style with Pro-Duce pickups. Equipped with a middle shaper active circuit with mini switch.

Front pickup has been replaced due to failure. Brand and model number unknown.
There are numerous dents on the body back.
There are some scuffs and dings.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Genuine soft case
Weight: 3.49kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.5mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 23.8mm
SCALE: 864mm (34")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair (replacement of front pickups), strap pin replacement (hole filling correction on neck side), removal of deteriorated cavity panel film

Specs

Item Rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Case
Genuine soft case

Weight
3.49kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.5mm

Neck Thickness near 1st Fret
19.8mm

Neck thickness near 12th fret
23.8mm

Scale
864mm (34")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair (replacement of front pickups), strap pin replacement (hole filling correction on neck side), removal of deteriorated cavity panel film