USED Squier / CST-55 Ash Natural [11]

This rare vintage model was manufactured by Fujigen between 1983 and 1984.
It features a design and specifications that faithfully reproduce the CBS-era Stratocaster of the 1970s, with a large headstock and bullet truss rod, giving it the full atmosphere of that era. The body is made of ash wood, which has a bright and clear sound, and the natural finish brings out the beauty of the wood grain. The neck is made of one-piece maple with a rosewood fingerboard for a smooth playing feel.
Three single coil pickups provide a variety of tones for a wide range of genres. A vintage-style synchronized tremolo bridge is also included, allowing for delicate vibrato expression.
This vintage model made in Japan boasts deep-rooted popularity among collectors and players, and is attractive because of its deep texture and solid build quality due to its age. This is a rare model with few copies in the market, so please take advantage of this opportunity.
Arm is missing.
The screw hole on the 1st string side of the rear PU has been widened, so the factory screws cannot be used and another size screw has been installed.
Overall, there are scratches, dents, rust on metal parts, and other signs of use, but there is no noticeable damage and it is in good condition considering its age.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: SQ02369
Year of manufacture: 1983-1984
Country of manufacture: Japan
Case: Non-authentic gig case
Accessories: * Arm missing
Weight: 3.76kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number SQ02369

Year of manufacture1983-1984

Country of manufacture Japan

CaseNon-genuine gig case

Accessories* Arm missing

Weight 3.76kg

Truss RodNo problemRod checked up to 60 degrees left and right, no problem.

Fret remainderCautionThe fretboard can still withstand cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 41.5mm

Neck thickness near the 1st fret 20.2mm

Neck thickness near 12th fret 23.1mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment