USED Navigator / SA-120 Cherry [11]

ES-335 copy model manufactured in the 80's by Navigator, an ESP subsidiary.
It consists of a laminated maple body, mahogany center block, mahogany neck and ebony fingerboard. The arch of the body is quite deep, so deep that the knobs face slightly inward.
While it has the airiness and sweetness characteristic of boxed guitars, it also produces a sound with power that rivals solid guitars. It has a wider range than the original ES-335, making it an excellent choice for any occasion.
The crack on the body back has been repaired with tight bond, the fingerboard is peeled and glued near the 1st and 2nd frets, and there is a bump near the binding.
The black part on the rod cover is about to peel off.
Overall, there are stains, scratches, dents, metal rust, and signs of use.
There are no noticeable abnormalities on the neck, and there are no playing condition problems.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.54kg
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees left and right (not much left).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.4mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, PG replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.54kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.4mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
24.6mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, PG replacement