USED Burny / MG-145S hide Model Yellow Heart [11]

The MG-145S is a reproduction of the Hide model from Burny by Fernandes.
While the full spec model had a through neck, this one has a bolt-on joint.
The yellow heart was used by X JAPAN hide in the latter half of his career, and combined with his exciting looks, it became intensely recognizable and is still used as a representative design on merchandise today.
The sustainer, which is indispensable in hide's guitar performance, allows for semi-permanent long tones, and of course, the harmonics mode can be used to force feedback effects.
By forcing a feedback effect, it is possible to pursue a more authentic hide sound.
Overall, there are many signs of use such as scratches, dents, abrasions, and chipped paint.
Dents near the jack plate and cracks near the end strap pins.
Scratches and dents on the head, rust and tarnish on metal parts.
The neck has a high neck wave and the low frets are inverted, and the string height has been adjusted to a higher level.
Currently there is some chattering in the live sound, and there are no problems with normal use in the sound coming out of the amp.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Case: Non-genuine soft case
Weight: 3.38 kg
Truss Rod: No problem, as long as the rod has been checked up to 60 degrees to the left and right (with some waviness and high spring).
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 19.4mm
Neck thickness near 12th fret: 21.8mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sustainer adjustment, nut adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Case
Non-genuine soft case

Weight
3.38kg

Truss Rod
Note: Rod has been checked up to 60 degrees to the left and right, no problems (wavy and high spring)

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.2mm

Neck thickness near 1st fret
19.4mm

Neck thickness near 12th fret
21.8mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, sustainer adjustment, nut adjustment