USED RS GUITARWORKS / Stee 60s Cherry Red [11]

RS Guitarworks' STEE 60S, a true fusion of TL and SG at a high level
The body shape is SG, and the electrical system is TL type STEE 60S.
The body is made of mahogany and is thick and solid. Maple neck with rosewood fingerboard. Rear pickup is LindyFralin Teevee and front pickup is Pychibilly. The front pickup can be coil-tapped with the switch on the tone pot.
The moderately aged finish gives the overall impression of austere finish.
This is a unique product of RS Guitarworks, the creators of this unlikely fusion.
The neck is in good playing condition.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: RS514-7
Country of manufacture: USA
Case: Original hard case
Accessories: spec sheet
Weight: 3.29kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 24.6mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
RS514-7

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Spec Sheet

Weight
3.29kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
24.6mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair