USED MD-MM Produce / MD.MM HSH TYPE [11]

MD-MM Produce Solid body type HSH array specification model is in stock!
We have checked with the distributor, but they do not know the model name, and the model number is unknown.
We think it may be a spot model or an order model.

The closest model in the market is "MD Premier G2/HSH Limited", but
However, we have not been able to find a black-colored one, so we cannot be sure.

The pegs are GOTOH 510, the bridge is made by GOTOH, and the pots are CTS/Orange Drop.
Rear/front pickups are vinyl wire type, middle pickups are cross wire type.

The body looks large at a glance, but it is surprisingly compact.
The neck is thin, easy to grip, and in excellent playing condition!

The unique looks and hardware colors are unified to create an outstanding design!

There are some scratches and dents on the overall appearance.
There are some dents and paint chips on the side of the body, and scratches, dents, and some chips on the head.
The tone knob is missing and has been replaced with a normal type knob.
* Back panel and arm missing.
There is no noticeable abnormality on the neck and no problem in playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 083007
Case: non-genuine soft case
Accessories: * Arm missing
Weight: 3.57kg
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees left and right (not much left).
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.6mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs: Item rank B: Fairly scratched and damaged.

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 083007

Case: non-genuine soft case

Accessories* Arm missing

Weight 3.57kg

Truss rodCaution: No problem when rod is checked up to 60 degrees to the left and right (not much left)

Fret height: The frets are high enough.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 41.6mm

Neck thickness near 1st fret 20.0mm

Neck thickness 22.5mm near 12th fret

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment