USED YAMAHA / CGX-171CCA Natural [11]

Cutaway-body elegat based on the Standard Classic Series CG171C.
It features a realistic acoustic sound with a piezo pickup + condenser microphone. Based on the concept of faithfully amplifying the live sound, it is equipped with an electrical system that continues to evolve through Yamaha's original development. Enjoy the diversity of sound with the raw sound, amplified sound, and pickup system.
There are some scuffs and dents, but no noticeable scratches.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: QMN127224
Case: Semi-hard case
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String Height: 4.0mm above the 12th fret
String height on treble string side: 3.4mm above 12th fret
Nut width: 49.1mm
Neck thickness near 1st fret: 20.6mm
Scale: 648mm (25.5")
Strings in setup: MATSUOKA MC1000HT / High Tension
Repair and maintenance: Cleaning, string replacement, rod adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
QMN127224

Case
Semi-hard case

Truss Rod
No problem, rod is fine when checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
4.0mm above 12th fret

String height on treble string side
3.4mm above the 12th fret

Nut width
49.1mm

Neck thickness near 1st fret
20.6mm

Scale
648mm (25.5")

Strings in setup
MATSUOKA MC1000HT / High Tension

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, electrical repair