USED Orville by Gibson / LPC Les Paul Custom MOD Ebony [11]

First Year Orville by Gibson Les Paul Custom made by Terada Gakki of Japan is in stock.
The Orville by Gibson Les Paul Custom made in Japan is popular both in Japan and overseas.
It is constructed with a maple top and mahogany back body, long tenon mahogany neck, and rosewood fingerboard.
With its ebony color, gold hardware, and diamond inlays on the head, this is a high-quality instrument with the presence of the original Gibson.
Front pickup has been replaced with Seymour Duncan 59n (with cover afterwards).
Rear pickup has been replaced with Seymour Duncan Custom.
Missing pot pointer. Jack has been replaced due to malfunction.
The strap pins were mismatched and have been replaced with Gibson type.
There is a chip on the tip of the head. Overall, there are scratches, dents, and rust on the metal.
The neck is slightly twisted and wavy, but there are no problems with normal use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: G887171
Year of manufacture: 1988
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.56kg
Truss Rod: No problem (with a note that the rod has been checked up to 60 degrees to the left and right).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 23.2mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial number
G887171

Year of manufacture
1988

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.56kg

Truss Rod
No problem (slight waviness)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
23.2mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment