USED Dean / 30th Anniversary Flying V XXX Black Burst [11]

The Dean 30th Anniversary V model was produced in 2007 and limited to 100 pieces worldwide.
Constructed with a flame maple top, mahogany body, mahogany neck, and rosewood fingerboard, it features a headstock with the 30th anniversary crest and a tailpiece with a distinctive engraved design.
Pickups or covers have probably been replaced as there is no engraving on the pickup covers.
Tone pot has been replaced due to defect. There are strap pin relocation marks on the lower part of the body, left and right.
There are cracks on the wood around the mounting screws of the scissors, and the screw holes have been refilled.
There are numerous scratches on the back of the body. Overall, there are scratches, dents, and rust on the metal.
The neck is slightly wavy, but there are no problems with playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: US07040797
Country of manufacture: Korea
Case: Non-authentic gig case
Weight: 3.02kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Item rank B: Fairly scratched and used, but no problem in normal use.

Serial number US07040797

Country of manufacture South Korea

CaseNon-genuine gig case

Weight 3.02kg

No truss rod problem, rod is checked up to 60 degrees left and right, no problem.

Fret remainder no problem, fret height is high enough

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.2mm

Neck thickness near the 1st fret: 21.4mm

Neck thickness near 12th fret 24.0mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair