USED Fender Japan / MB98-70SD Sunburst [11]

Fender Japan Mustang Bass MB98-70SD is in stock.
Crafted in Japan This Mustang-style short-scale bass was manufactured in the era of the label.
The body is decorated in Sunburst, which is not usually seen in the lineup. This coloring is distinct from the standard specifications that are continuously listed in the official catalog, and it is highly likely that this is one of the off-catalog or limited distribution finishes.
The neck is made of maple with an easy-to-grip shape and rosewood fingerboard, providing a good balance between the loose tension and tight, grainy bass that only a short scale of around 30 inches can offer.
The pickups are genuine Mustang type, and their straightforward tone with the natural sound of a passive pickup can be used in any genre, and the tone can be used on stage or for recording with ease.
The pickguard was missing, so it was newly made by a specialized company.
Overall, there are scratches and dents, and the guitar has some signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: CIJ P035707
Year of manufacture: 1999-2002
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.44kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.6mm
Neck thickness near 1st fret: 19.6mm
Neck thickness near 12th fret: 24.8mm
SCALE: 768mm (30.23")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL170M / .045-.100 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number CIJ P035707

Year of manufacture 1999-2002

Country of manufacture Japan

CaseNon-genuine soft case

Weight3.44kg

No truss rod problem, rod is fine, checked up to 60 degrees to the left and right

No fret remainder problem, enough fret height

String height: 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 38.6mm

Neck thickness near the 1st fret: 19.6mm

Neck thickness near 12th fret 24.8mm

Scale 768mm (30.23")

RADIUS184mm (7.25")

Strings D'Addario EXL170M / .045-.100 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair