USED Gibson USA / LPB-3 Les Paul Standard Bass Heritage Cherry Sunburst [11]

Made in 1994, this very rare model was produced for a limited period of about 4 years in the early 90s.
Overall production numbers of this Les Paul bass are not large, and there are many people looking for one.
It consists of a single cutaway body with mahogany back and maple top, mahogany neck and ebony fingerboard. Avalon trapezoid inlays are applied. The design gives a sense of solid sustain in a heavy construction.
This is a one-of-a-kind instrument with a fat low end with rich sustain, powerful sound produced by the high-output humbuckers, and the stately look of a Les Paul.
The strap pin has been relocated to the back side, leaving an installation mark in its original position.
Overall, there are scratches, dings, paint peeling, rust on metal parts, and other signs of age and use, but there are no noticeable abnormalities on the neck and no problems with playing condition.
Item Rank: B: Fairly scratched and worn, but no problems in normal use.

Serial number: 94040125
Year of manufacture: 1994
Country of manufacture: USA
Case: Original hard case
Weight: 5.26kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 23.3mm
SCALE: 864mm (34")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number 94040125

Year of manufacture 1994

Country of manufactureUSA

CaseGenuine hard case

Weight5.26kg

Truss RodCautionChecked up to 60 degrees on both sides of the rod, no problem.

Fret remainderNo problem, fret height is sufficient.

String height: 2.5mm above the 12th fret on the bass string side

String height: 2.0mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near 1st fret 20.5mm

Neck thickness near 12th fret 23.3mm

SCALE 864mm (34")

RADIUS254mm (10")

Strings for setup D'Addario EXL165 / .045-.105 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair