USED Valley Arts / M-Series Limited TL Type Cherry Sunburst [11]

Valley Arts, the pioneer of component guitars, has attracted attention in the United States.
The M-Series Limited TL Type is a gem produced by Asahi Woodworking, the pride of Japan's high-end guitar makers, who have worked on many high-end guitars such as MUSICMAN and ORNETTS, and their exquisite craftsmanship shines through.
The body is semi-hollow construction with mahogany center wood and figured maple top and back. The rich mid-low range is exquisitely blended with the sparkling attack characteristic of maple.
The neck is made of maple with a fine bird's eye pattern. The shape fits naturally in the hand and is comfortable to play for a long time. The fingerboard is made of jet-black ebony, which produces a clear, well-defined tone. The pickups are single type made by EMG. In addition to its low noise design, it covers a wide range of tones from delicate nuance to powerful attack, and boasts versatility for all genres from clean to drive.
It is also a rare collector's item that rarely appears on the market today, and is becoming harder to find every year.
This is one of the finest instruments that makes no compromises in appearance, sound, or playing comfort.
Some metal parts have some chrome peeling. The EMG logo on the front pickup is slightly peeling.
There are some scratches and dents, but there are no noticeable damages.
There is a small amount of truss rod remaining in the loose direction.
The neck is slightly wavy, but it has been worn out, so there are no problems with the playing condition.
The case smells of cigarettes.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 5333
Case: Genuine soft case
Weight: 3.52kg
Truss Rod: No problem (only a little left) with a note that the rod has been checked up to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 5333

Case Genuine soft case

Weight 3.52kg

Truss RodCaution: No problem when the rod is checked up to 60 degrees to the left and right (not much left)

Fret remainderNo problem, there is enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near 1st fret 19.5mm

Neck thickness 22.3mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment