USED Ibanez / SA220FM Transparent Aqua [11]

Thin-bodied, capable model with beautiful flame top and versatile sound!
The Ibanez "SA220FM" combines a flame maple top with a mahogany back. The slim and lightweight body design has a rich low midrange, making it both easy to handle when playing and deep in sound.
The combination of two humbuckers and a 5-way switch allows for a wide range of sound creation from clean to driven sounds, and the SAT Pro tremolo supports smooth arming operation.
The SAT Pro tremolo allows for smooth arming. This model combines the high quality looks and high playability of higher-end models, and is recommended for players of a wide range of genres.
There are several paint chips on the top of the body and a paint crack at the neck joint.
The truss rod cover is missing and the string thread on the back panel has been cut off.
Rear pickup has been replaced with a Seymour Duncan (model unknown).
There are scratches, dents, faded top, and dull parts.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: W141033
Case: Non-authentic soft case
Accessories: Arm
Weight: 2.92kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Item rank B+: Some scratches, but no problem in normal use.

Serial number W141033

CaseNon-genuine soft case

AccessoriesArm

Weight2.92kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.1mm

Neck thickness near 1st fret 20.5mm

Neck thickness 22.7mm near 12th fret

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment