USED Fender USA / American Original 50s Stratocaster Aztec Gold [11]

The definitive classic sound of the 1950s Stratocaster brought back to life in the modern age
The Fender American Original '50s Stratocaster faithfully recreates the details of the original 1950s Stratocaster. The alder body and maple neck combine to produce a balanced, articulate tone, while the 9.5" radius maple fingerboard and vintage tal frets make chord work and soloing a breeze.

The "Pure Vintage '59" single-coil pickups provide a wide range of tones, from clean, warm, classic tones to distorted rock tones. The vintage-style tremolo and tuning machines have also been faithfully reproduced, giving the Stratocaster the look and sound of a 1950s Stratocaster.

This is the perfect guitar for guitarists seeking a classic look and sound.
There are scratches, dents, and dull parts.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V1741745
Country of manufacture: U.S.A.
Case: Original hard case
Weight: 3.46kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 25.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL120 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number V1741745

Country of manufacture: U.S.A.

CaseGenuine hard case

Weight 3.46kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.2mm

Neck thickness near 1st fret 22.5mm

Neck thickness 25.1mm near 12th fret

Scale 648mm (25.5")

RADIUS241mm (9.5")

Strings D'Addario EXL120 / .009-.042 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment