USED Red House / ALBA Gold Top [11]

The ALBA is an original model from Red House, a guitar factory in Nagano, Japan.
With a contour reminiscent of a Telecaster mixed with the look of a gold-top Les Paul, it is a completely original design with modern functionality.
The body material is made of high-quality alder, which provides a moderate weight and rich mid-low range. Two passive humbuckers are used for pickups, providing a wide range of tones from warm and three-dimensional to core clean sounds. The tone is equipped with coil taps for use with single-pickup sounds. Furthermore, Red House's unique "HVC (Head Vibration Controller)" mechanism is built into the back of the neck to suppress unwanted vibrations in the head section, providing a remarkably stable pitch feel and extended sustain.
This is a special instrument that offers reliable quality in the professional field and is a pleasure to own at the same time.
There are some scuffs and dings, but no noticeable scratches.
Product Rank: B+: Some scratches, but no problems in normal use.

Country of manufacture: Japan
Case: Genuine soft case
Accessories: bridge wrench, badge
Weight: 3.26kg
Truss Rod: No problem, rod checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.6mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.5mm
SCALE: 25.50inch
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2222 / .009-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Wrench for bridge, badge

Weight
3.26kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.6mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.5mm

Scale
25.50inch

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2222 / .009-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment