USED ESP / Jeff Hanneman Signature Model Black on decal [11]

Slayer Jeff Hanneman model! Iconic Raiders design and aggressive sound
The ESP Jeff Hanneman model is the signature guitar of thrash metal legend Jeff Hanneman.

This particular model features a black body custom-made with a replica decal kit of the Hanneman Raiders design, which gives it an instantly iconic look. It is also recommended as a collector's item.

Alder body and maple-through neck combine to deliver a well-balanced sound with rich sustain. The rosewood fingerboard has dot inlays and the SLAYER logo is engraved on the 12th fret.

With two EMG 81 x2 active pickups and a Koehler bridge, you can enjoy Jeff Hanneman's aggressive and clear sound, even down-tuning and high-speed riffing.

This model is a must-have for fans of Jeff Hanneman's music.
The right side of the body has been reinforced with tape to prevent the decal from peeling off.
There is a paint crack at the tip of the head and a noticeable ding near the jack.
It has been replaced with a DiMaggio clip lock. (A strap is also included.)
There are other signs of use such as scratches, dents, dull parts, and rust.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 13030289
Year of manufacture: 2000
Country of manufacture: Japan
Case: Non-authentic gig case
Weight: 3.73kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.6mm
Neck thickness near 1st fret: 19.1mm
Neck thickness near 12th fret: 21.4mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
13030289

Year of manufacture
2000

Country of manufacture
Japan

Case
Non-genuine gig case

Weight
3.73kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.6mm

Neck thickness near 1st fret
19.1mm

Neck thickness near 12th fret
21.4mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair