USED Fujigen / Neo Classic NST10RAL/02 Mod 3-Tone Sunburst [11]

Fujigen "Neo Classic" series "NST10RAL-/02" custom spec is now in stock!
Based on the traditional ST style, this guitar incorporates new elements to meet today's needs.
Alder body, maple neck and rosewood fingerboard.
The fret edge treatment supports smooth fingering, and the "compound radius fingerboard" and "easy-to-grip neck grip that is neither too thick nor too thin" are adopted to reduce stress when playing.

This is a custom-spec model with the pickups changed from 3S array to HSH array and the controls changed from 1 volume/2 tones to 1 volume/1 tone (auto-tap wiring).
Three Seymour Duncan pickups are installed: front: SH-1N, center: SSL2, and rear: SH4.
Auto-tap wiring specs and HSH arrangement allow for a wide range of sound makeup.
It is in relatively clean condition with only minor scratches and small dings.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: F210251
Country of manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 3.64kg
Truss Rod: No problem (only a little left), with the caveat that the rod has been checked to 60 degrees left and right.
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 648mm (25.5")
RADIUS: 254-305mm (10-12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
F210251

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Arm

Weight
3.64kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.3mm

Scale
648mm (25.5")

RADIUS
254-305mm (10-12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair