USED Fender / Made in Japan Traditional 60s Stratocaster Black [11]

Fender "Made in Japan Traditional" series 60s Stratocaster is now in stock!
The Traditional 60s Stratocaster combines classic looks with modern playability.
Gloss finish basswood body, maple neck and rosewood fingerboard.
The 9.5" radius "U" shaped maple neck with 21 vintage style frets offers the classic playability of the Traditional series. 6-saddle vintage style Synchronized Tremolo bridge and original pickups selected specifically for the Traditional Series give it a realistic and musical vintage tone.

Recommended for anyone looking for a first Strat, a second guitar, or a guitar for the stage with a vintage flavor.
There are some minor scratches, but the guitar is in relatively clean condition.
The neck is slightly twisted, but it has been set up and is in good playing condition.
The neck is slightly twisted, but has been set up including rubbing, and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD23026044
Year of manufacture: 2023
Country of manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 3.36kg
Truss Rod: No problem (with a slight torsion)
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.4mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD23026044

Year of manufacture 2023

Country of manufacture Japan

CaseGenuine soft case

AccessoriesArm

Weight3.36kg

Truss RodCautionChecked up to 60 degrees to both sides of the rod, no problem (slightly twisted)

Fret remainderNo problem, sufficient fret height.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 41.4mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness 22.3mm near 12th fret

Scale 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment