USED Fender Japan / TL52-70SPL MOD Butterscotch Blonde [11]

A guitar crafted after the model famously used by that well-known band's guitarist.
A special model that gives the quintessential '52-style Telecaster its signature character with a front humbucker configuration.
The white ash body and one-piece maple neck deliver a powerful, resonant tone, enhanced by the richness and projection inherent to the HS pickup layout. Combined with the focused attack from the brass bridge, it produces a powerful sound distinct from typical Telecasters.
This is a Japan vintage piece for connoisseurs, offering the high precision craftsmanship typical of 80s Fujigen and the substantial presence of a heavyweight ash body.

Due to pickup issues, the front pickup was replaced with a Seymour Duncan JNJ, and the rear with a G121A Black. The selector switch and jack were also replaced.
There is a crack in the neck joint. There is scorch damage to the finish between the 1st and 2nd string peg posts, likely caused by a cigarette.
The front of the bridge shows slight warping and lifting, but this does not affect playability.
The neck has dents and darkened areas. There is a crack in the neck joint. There is scorching on the finish between the 1st and 2nd string peg posts caused by a cigarette.
The front of the bridge shows slight warping and lifting, but this does not affect playability.
The neck has dents and darkened areas. Some side position marks are slightly sunken.
Sticker residue on the body back. Rust on the bridge. Other metal parts show minor deterioration and scratches.
Other minor scratches and dents are visible, showing signs of use.
The neck exhibits high rise, with the 6th string side showing a slight forward bow, twisting, and wavy warping. The frets have been leveled and pose no issues for playing.
Condition Grade: B: Significant scratches & signs of use present, but no issues for normal playing purposes

Serial Number: E830612
Manufacturing Year: 1984-1987
Country of Manufacture: Japan
Case: Non-genuine soft case
Weight: 4.70kg
Truss Rod: No issues. Rod movement confirmed up to 60 degrees in both directions with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.8mm
Neck Thickness Near 1st Fret: 21.0mm
Neck Thickness at 12th Fret: 22.5mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Binding Adjustment, Control Cleaning, Front & Rear Pickup Replacement, Selector Switch Replacement, Jack Replacement, Sticker Removal, Strap Pin Replacement

* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.

* Any measurements listed for the truss rod, remaining frets, or string height were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.

* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.