USED Squier / SST314H-55 [11]

A Japanese-made Squier from the JV serial number era, strongly reflecting the modern aesthetic characteristic of Fender Japan’s early days.
The serial number is JV85335. This instrument is believed to have been manufactured by Fujigen around 1983–1984.
Featuring a 24.75-inch scale, this guitar is highly playable, combining the nimble feel of a Strat with the power characteristic of a humbucker-equipped model.
It also features modern details typical of the early 1980s, such as a 22-fret neck and an End ROX tremolo.
Its striking appearance, unified in white tones from the body to the headstock and throughout the neck, strongly evokes the “sense of the near future” envisioned by Fender Japan at the time—a distinct feel from today’s vintage reissue models.
Tremolo arm missing.
Details regarding the pickups (e.g., whether they are genuine Fender) are unknown.
The tuners have been replaced, and the screw holes from the original tuners remain. Additionally, the tuners are slightly stiff to turn.
There is a crack at the neck joint. There is a large chip in the finish extending from the tip of the headstock to the back. Sun fading is visible throughout.
Additionally, there are scratches, dents, dirt, and rust throughout, showing signs of use.
Condition Grade: B: Shows significant scratches and signs of use, but is in good working condition for normal use

Serial Number: JV85335
Case: Non-original soft case
Accessories: * Arm missing
Weight: 3.45 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (limited adjustment remaining)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 628mm (24.75")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.