USED Fender / ISHIBASHI FSR Made in Japan Hybrid II Stratocaster Transparent Red Burst [11]

The Hybrid II Stratocaster, featuring a quilted maple top, was released exclusively through Ishibashi Music in 2021.
It combines an alder body with a beautiful quilted maple top, along with a maple neck and rosewood fingerboard. The Transparent Red Burst finish and white pearl pickguard exude a sense of luxury, giving this limited-edition model a distinctive presence.

Equipped with three Hybrid II Custom Voiced Single Coil pickups, it delivers a wide range of tones—from the clear, crisp clean sound characteristic of a Stratocaster to a rich, grippy overdrive sound. With a 9.5-inch radius fingerboard, 22 frets, and a two-point-mounted synchronized tremolo, this guitar offers the signature playability of the Made in Japan Hybrid II series, which seamlessly blends vintage charm with modern playability.
Back panel and tremolo arm are missing.
Due to a missing volume knob, a non-original knob has been installed.

There are signs of sanding across the entire body, giving the impression that the gloss finish was removed with sandpaper or similar. Although a professional has performed a gloss restoration on the body, some sanding marks remain in areas such as the body end.

There are traces of conductive paint treatment inside the cavity.
A broken capacitor wire has been repaired.

There is a crack at the neck joint on the 6th string side.
Overall, there are scratches, dents, and rust on the metal parts, indicating heavy wear.
There are no noticeable issues with the neck, and it is in good playing condition.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use

Serial Number: JD21015750
Year of Manufacture: 2021
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: * Arm missing
Weight: 3.61 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.3 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648 mm (25.5")
RADIUS: 241 mm (9.5")
Strings at Setup: D'Addario EXL120 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, leveling, broken tremolo arm repair, body polishing, tightening of two loose tremolo spring screw holes, electronics repair (repair of broken capacitor wiring), replacement of the 1st string tuner

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements regarding the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.