USED Fender USA / American Standard Stratocaster 3 Tone Sunburst [11]

This is a pre-2000 American Standard Series Stratocaster with an alder body and maple neck.
Alder body with maple neck, 2-point tremolo support, and 22 frets for playability.
Three single coil pickups with volume, front/center tone, and TBX controls.

The TBX control has a chatter.
The paint on the entire neck is peeling off easily due to deterioration, and some of it is peeling off.
There is a thin crack at the neck joint.
Overall, there are scratches, dents, and rust on the metal, showing signs of use.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: N510106
Year of manufacture: 1986-1999
Country of manufacture: USA
Case: Original hard case
Weight: 3.63kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
N510106

Year of manufacture
1986-1999

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.63kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.3mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
21.9mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment