USED FENDER / 1978 Precision Bass MOD Black [12]

Precision bass with a heavy, fat tone.
The serial number indicates that it was made in 1978.
The pickups have already been replaced with Duncan SPB-1 at the time of purchase, pots, knobs, and jacks have been replaced at our repair center, and the electrical system is not original but has been practically modified and maintained.
The bridge octave screws and springs have also been replaced.
The sound is punchy enough when played live, and even more so when connected to an amp.
Weighing 3.94kg, which is a little light for a bass from the late 70s, it has a solid mid-bass tone that is very dependable.

The neck has some paint discoloration, many scratches, dings, and paint peeling, and there is a paint crack on the neck grip.
The body also has many scratches, dents, and peeling paint, and the metal parts are tarnished, showing signs of use commensurate with its age.
The neck is a little wavy and the frets are worn, but there are no problems with playability.
The guitar has been maintained and cleaned at our repair center, including replacement of electrical parts and bridge parts, and is in good playing condition.

Serial number: S867458
Year of manufacture: 1978
Country of manufacture: USA
Case: Original hard case
Weight: 3.94kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Remaining: Still can be cut, but the frets are low.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 22.8mm
Neck thickness near 12th fret: 25.4mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

specs

Serial No.
S867458

Year of manufacture
1978

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.94kg

Truss Rod
No problem (slight waviness)

Remaining frets
Still can withstand cutting, but the frets are low.

String height on the bass string side
2.5mm above 12th fret

High string side
2.0mm above the 12th fret

Nut width
41.7mm

Neck thickness near 1st fret
22.8mm

Neck thickness near 12th fret
25.4mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair