USED YAMAHA / SG700 Red Sunburst [12]

The SG series, which is still highly regarded as YAMAHA's original model, is now in stock.
The year of production is unknown, but this SG700 was manufactured from 1976 to 1979.
The arched maple top/mahogany back body features a pointed double cutaway on both sides.
The mahogany neck/rosewood fingerboard is firmly set neck-jointed for high rigidity and playability at high frets.
The pegs have been replaced with Grover locking pegs for stable tuning and speedy string changes.
The model is also equipped with a coil tap function named "Bi-Sound System" by pushing/pushing each tone, and a wide range of sound variations are available.

There is a ding on the tip of the head, and minor scratches are scattered on the head top, and the paint is slightly cloudy.
The neck grip also has some minor dents, and there are paint cracks from the 2nd to 4th frets on the 6th string side and from the 12th fret to the 4th fret.
The body also has many dents and scratches, and the pickup covers have peeling plating.
The truss rod cover has been replaced, and there are some signs of use commensurate with its age, but it has been maintained and cleaned at our repair center and is in good playability condition.

Serial number: 004558
Country of manufacture: Japan
Case: Original soft case
Weight: 4.39kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 24.4mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

specs

Serial No.
004558

Country of manufacture
Japan

Case
Genuine soft case

Weight
4.39kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
24.4mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair