USED Fender USA / Eric Clapton Stratocaster Vintage Noiseless Black [12]

The Eric Clapton Stratocaster boasts immense popularity as a model that transcends the boundaries of artist signatures.
The body is made of carefully selected alder, the neck is one-piece maple, and the neck shape is the soft "V" shape that Clapton loved so much, with a 9.5 radius fingerboard and vintage-type frets.
Three "Vintage Noiseless" single-coil pickups are mounted on the pickup system, which not only reduces noise but also produces a very fat and responsive sound.
The "TBX Tone Control" allows you to freely control the high and low frequencies, so it can be used for a wide range of sounds from sweet fronts to jangly cutting sounds.

There are large paint chips from the side of the body to the back contour on the 6th string side, and on the inside of the cutaway on the 1st string side.
There is a paint crack on the elbow contour of the top of the body, and there are some paint correction marks on the end of the body.
The logo on the front pickup cover is missing, the pickguard is partially cracked, and the overall color is slightly discolored.
The neck has a matte finish overall, but the neck grip has a glossy finish due to rubbing.
The neck has a matte finish overall, but the neck grip has a glossy finish due to rubbing.
The arm and the original hard case are missing.

Truss rod: There is room for tightening/loosening direction.
Fret: about 70% to 80%.
String height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 42.5mm
Neck thickness (near 1st fret): 21.9mm
Neck thickness (near 12th fret): 22.9mm
Scale: 648mm (25.5")
RADIUS：241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set

Year of manufacture: 2005
Country of manufacture: U.S.A.
Case: Soft case / non-genuine
Accessories：None
Serial number: SZ5051685
Weight: 3.64kg

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Modified parts:-.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
Please note that these values may not be the same as the description at the time of delivery due to humidity and temperature during the display period in the store or during transportation.

* We try to delete product information as soon as possible, but this is not always in real time.