USED Orville by Gibson / LPC / Les Paul Custom 1991 Ebony [12]

We have just received a used Orville by Gibson Les Paul Custom made in 1991, which is very rare nowadays.
The brand has been reevaluated in recent years, especially overseas, and is becoming more and more popular.
This Les Paul is made in Japan by Terada Gakki, which has a reputation for manufacturing Japanese-made Gretsch and Epiphone's Elitist series.
This Les Paul is basically equipped with Gibson pickups, but there are various variations depending on the year of manufacture, and this particular model is equipped with Gibson USA engraved numbered PAF front and rear pickups.
This guitar is equipped with Gibson USA numbered PAF front and rear pickups. You can enjoy the quality of the Japanese-made construction and the sound of a Les Paul Custom.

There is a paint chip on the tip of the head and a crack on the side of the fingerboard from the nut to the first fret.
There are numerous dents and scratches scattered throughout the body and neck grip.
The binding at the neck of the top of the body on the first string side is slightly lifted, and the pickguard is missing.
The pickguard is missing, and the metal parts are dull and the plating is peeling.

Serial number: G1020011
Year of manufacture: 1991
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.22kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on high string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 624mm (24.56")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

specs

Serial No.
G1020011

Year of manufacture
1991

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.22kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Remaining frets
Still good for cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
24.3mm

Scale
624mm (24.56")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair