USED Fender Japan / JB62-750 3Tone Sunburst [12]

We have a used JB62-750 with alder body & USA JB-Vintage pickups made around 1991.
From the neck date, it is assumed to be one manufactured in 1991.
It was manufactured by Fujigen Musical Instruments and is one of the most popular Fender Japan guitars in the used market in recent years.
Alder body and USA pickups give it an authentic jazz bass sound with a strong backbone.

The front POD, ground wire, and peg posts have been replaced.
The frets are fairly low with about 50% remaining, but this is not a problem in its current condition.
The fretboard has been maintained and cleaned at our repair center, so there are no problems with the playing condition.

Item rank: B+: Some scratches, but no problem in normal use.

Serial number: K026951
Year of manufacture: 1991
Country of manufacture: Japan
Case: Hard case (general purpose)
Weight: 4.22kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.5mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment

Specs: D'Addario EXL165 / .045-.105 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
K026951

Year of manufacture
1991

Country of manufacture
Japan

Case
Hard case (general purpose)

Weight
4.22kg

Truss Rod
No problem, confirmed to 60 degrees to the left and right of the rod

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.5mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
24.5mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment