USED Gibson / ES-347TD 1980 Sunburst [12]

We are pleased to announce the arrival of a 1980 ES-347.
It was manufactured from 1978 to 1991 as a derivative model of the ES-335, and has a gorgeous look with its impressive headstock with multi-binding and crown inlays, brass nut, block position ebony fingerboard, and gold hardware.
The pickups are two early-spec Super Hunbucker mounted and can be coil-tapped by a toggle switch on the 1st string side horn.
The tailpiece is equipped with a TP-6 with fine tuners, making this model practical as well as sonic.

There are many scratches and dents scattered throughout, paint cracks at the neck joint, cracks on the body binding, paint peeling at the left end of the body top, weather check inside the cutaway, dull and peeling metal parts, paint peeling on the neck grip, and so on. The neck grip paint is peeling, and the guitar has a dignified look due to its age.
It has been refretted and re-nutted, the pegs have been replaced with GROVER, and all the electrical pots have probably been replaced.
The guitar has been cleaned and maintained at our repair center, so playability is not a problem.
The original hard case is included, but there are some signs of use such as tears on the exterior and rust on the metal fittings.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 81630012
Year of manufacture: 1980
Country of manufacture: USA
Case: Original hard case
Weight: 4.25kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 19.6mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
81630012

Year of manufacture
1980

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
4.25kg

Truss Rod
No problem, rod is 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.5mm

Neck thickness near 1st fret
19.6mm

Neck thickness near 12th fret
24.6mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment