USED Gibson / SG Standard 1975 Walnut [12]

We have a 1975 SG Standard in stock.
It features a large head with GROVER 102G rotomatic pegs, a 3-piece mahogany neck with volute, ebony fingerboard, and small block inlays.
The pickups are the original "Super Humbucker" pickups from this era, and the bridge is equipped with a Wide Traveler Tune-O-Matic.
The serial number, specs, and pot date on the front tone (13775xxx) indicate that this guitar was made in 1975, but the other pot dates are illegible due to solder.
The quality wood of the time has been transformed into a deeper sound over the past 50 years, especially in the mid-bass, which is a true vintage sound that even vintage reissues cannot produce.

Overall, there are some minor scratches and dings, but considering the age, the condition of preservation is good.
The nut has been replaced, but the frets are still original, and even though they are low due to rubbing, there are no problems with playing.
The fretboard has been maintained and cleaned at our repair center and is in good playability condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 103143
Year of manufacture: 1975
Country of manufacture: USA
Case: Original hard case
Weight: 3.11kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 25.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs & Condition

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
103143

Year of manufacture
1975

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.11kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
25.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment