USED Fender / 1979 Stratocaster White(Refinish) [12]

We have a 1979 Stratocaster in stock.
The original color is white, but it has been refinished to the same white color. It has yellow discoloration due to age, and the paint is peeling on the elbow contour and the side of the pickguard.
Original pickups are installed according to the pickup date (52079), but the pots have been replaced.
The nuts have been replaced, but the frets are believed to be original.
The heavy ash body and powerful pickups give the guitar a punchy sound that can be used for hard rock.

Paint is peeling around the tip of the head, there is a paint crack on the head back, and a part of the head side is discolored.
There is a large paint peel on the fingerboard side from the nut to the first fret on the first string side, and a large dent and paint peel on the fingerboard side at the fourth fret.
The octave adjustment springs for the 4th, 5th, and 6th strings have been replaced (original included).
The frets are quite worn, but we are not replacing them at this time because we value the originality and the guitar is playable in its current condition.
It has been set up at our repair center in a condition that does not interfere with playing.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: S928577
Year of manufacture: 1979
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 4.03kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Residuals: Need to consider replacing the frets next time it is repaired.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 23.5mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, tension pin installation correction, fingerboard side paint burr correction, pickguard screws installed, saddle springs replaced (6,5,4 strings)

Specs

Item rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
S928577

Year of manufacture
1979

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
4.03kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret remainder
Need to consider fret replacement for next repair

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
23.5mm

Neck thickness near 12th fret
24.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, tension pin installation correction, fingerboard side paint burr correction, pickguard screw x1 installation, saddle spring replacement (6,5,4 strings)