USED Fender Japan / Mustang / MG69-65 Yellow White [12]

The compact body and short scale make it easy to play!
This Japanese-made mustang reproduces the distinctive specifications of circa 1969, such as the contoured body and metal button-type pegs.
Compact basswood body with maple neck/rosewood fingerboard with 22 frets.
It is equipped with a single pickup and a dynamic vibrato unit for a unique sound.
The short scale is recommended for those with small hands.

There is a large sticker mark on the top of the body, and there are scratches and dents of various sizes scattered throughout the body.
There are paint cracks and chips around the neck joint, and the fingerboard edge has peeling paint.
Although there are some missing arms and signs of use, each part has been maintained and cleaned at our repair center, and playability is good.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: CIJ P088525
Year of manufacture: 1999-2002
Country of manufacture: Japan
Case: Genuine soft case
Weight: 3.55kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.6mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs & Condition

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
CIJ P088525

Year of manufacture
1999-2002

Country of manufacture
Japan

Case
Genuine soft case

Weight
3.55kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.6mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment