USED Fender Japan / BOXER SERIES / SF-455 Black [12]

This ambitious series incorporates modern specs from the 1980s.
While utilizing the traditional form of the Stratocaster, this model features practical modern specs such as the Kohler tremolo system and humbucker pickups.

Due to the missing lock nut, the part has been removed and a tension bar has been installed.
The bridge saddle's immovable screw is stuck, making it difficult to adjust the string height, so the guitar has been set up with the current string height.
There are many scratches, dents, and paint chips scattered throughout, and some metal parts have flaking plating and rust.
The back panel is missing, and although there are many signs of use, each part has been maintained and cleaned at our repair center, so playability is good.
* The tuning is a little easy to go out of tune due to the fact that the strings are not locked. Please understand this beforehand.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: E720464
Year of manufacture: 1984-987
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.77kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
E720464

Year of manufacture
1984-987

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.77kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
19.9mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair