USED B.C.Rich / JJSW2 / Joey Jordison Signature Warlock II White with Blood Splatter [12]

Joey Jordison signature high cost performance model is in stock, beautifully used with little use.
This model was made by Joey Jordison, who was active in the heavy scene as the drummer of Slipknot and the guitarist of Murderdolls.
The body material is made of nato, which has characteristics similar to mahogany, and the neck joint is bolt-on, making it affordable.
The signature model is full of features such as high-impact blood spray paint and Murderdolls Insignia inlays on the truss rod cover and fretboard.

It is in good condition with only minor scuffs and scratches and little signs of use.
There is no damage to the tip, which is often seen on deformed guitars.
The neck is slightly wavy and the frets are low, but the guitar has been maintained and cleaned at our repair center, so it is in good playable condition.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: F01110836
Country of manufacture: China
Case: Soft case
Accessories: Arm
Weight: 3.40kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Remaining: Still can be cut, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

Specs: Percentage (%)

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
F01110836

Country of manufacture
China

Case
Soft case

Accessories
Arm

Weight
3.40kg

Truss Rod
No problem (slight waviness)

Fret remainder
Still can withstand cutting, but the frets are low.

String height on the bass string side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.5mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.0mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment